Skip to content
Saving and sharing

Downloading your 3D model (GLB, 3MF)

How to save GLB and 3MF files from a work with a generated 3D model, how the two formats differ and what to use them for, and how to set up the 3MF for your own 3D printer.

Updated:

Follow these steps to save the data of a 3D model you created and use it in other software.

Works you can save from

For works where you generated a 3D model on or after July 18, 2026, you can save both GLB and 3MF files. Saving doesn't cost any extra tokens. If a work was made under the earlier pricing (free generation, paid saving) and you didn't purchase saving for it, you can't save its 3MF.

How to save

  1. From "Gallery" in the menu at the top of the screen, open "Works" and select a work with a generated 3D model.
  2. On the work page, select "Save".
  3. Choose "3D model (GLB)" or "3D print file (3MF)".

For works whose 3MF hasn't been prepared yet, the file is created when you choose it, so it may take a moment before the download starts.

Differences between GLB and 3MF

GLB

  • 3D data that combines the shape and colors (textures) in a single file.
  • Example uses: viewing or editing it in 3D software, or displaying it in 3D on a web page.
  • It can be opened in 3D software that supports the glTF format, such as Blender. Depending on the software and version, colors (textures) may not load correctly.

3MF

  • A format for 3D printing. It includes color information and is created at a size where the longest side is 80 mm.
  • Example use: opening it in slicer software to prepare it for printing on a 3D printer.
  • It opens in slicer software such as Bambu Studio, PrusaSlicer and UltiMaker Cura. You can change the size in the slicer. How much of the color information is loaded depends on the software, so please also check your software's documentation.

Using it with your own 3D printer

After loading the saved 3MF into your slicer software, set it up in this order.

  1. Decide the size. The 3MF is saved at a size where the longest side is 80 mm, but this isn't necessarily a good size for printing. Scale it up or down in the slicer while checking your printer's build volume and how the thin parts look.
  2. Check the orientation. 3MF files made now keep the original 3D model's top and bottom and are saved so that the lowest point rests on the build plate. 3MF files created before October 25, 2026 may open lying on their side, and saving them again won't fix this. Neither is necessarily a good orientation for printing, so adjust it in the slicer while checking the contact surface and how the supports attach.
  3. Check where supports are needed. Supports are structures that hold up overhanging parts during printing. Set them in the slicer according to the shape and orientation, and check how they attach in the preview after slicing.

If you print with single-color filament, the result will be the color of the filament.

About 3D printing

Ordering 3D prints through Figmee is Coming Soon. You can't place an order yet. Once the service is available, delivery will be limited to Japan. The 3MF file is meant for your own 3D printer or for print services that accept 3MF files. Because the data is generated automatically, whether it prints as is, and how accurately colors and fine details are reproduced, depends on your printer and software.

If saving doesn't work, please contact us via the contact form.

Still need help?

Let us know what's happening through the contact form.

Contact us