When you want to share a 3D model as a video on social media, the go-to format is the "turntable video": a few seconds of the model spinning all the way around at a steady speed. There are three main ways to make one: screen-record a viewer while you rotate the model, render a turntable in 3D software, or use a service that has a built-in video export. In this article we walk through the steps for each, the format details worth checking before you post, and a few tips that make the result look polished.
Note: Figmee currently lets you upload a drawing or illustration and then generate and download figurine-style images and 3D model data (GLB / 3MF). Sales of physical 3D-printed items are Coming Soon.
Why show a 3D model by "spinning" it?
If you post a 3D model as a single still image, viewers can't tell it apart from an illustration. Crop it down to the front silhouette and the colors, and everything that makes it worth building in 3D — its thickness, the shape of its sides, how the back is finished — ends up outside the frame.
Spin it for just a few seconds and all of that comes across at once. The turntable video has long been a standard way to present 3D work, and its strength is that it shows three things at the same time:
- Depth and thickness: the front-to-back volume you can't read from the front.
- The back and sides: the parts you put work into, or the parts you skipped, are right there to see.
- The feel of the material: as the angle of the light changes, the gloss or matte quality of the surface comes through.
On the other hand, a rotating video also reveals more than you might want. If a model's back isn't finished, that shows the instant it turns. It's reassuring to play the video through to the end yourself before posting and make sure no angle you'd rather hide sneaks in.
Comparing the three methods
Even for the same kind of turntable video, what you need and what you get depend on the method.
| Method | What you need | Rough time | Control over quality | Best for |
|---|---|---|---|---|
| Screen-recording a viewer | A 3D viewer plus your device's screen recorder | About 5 minutes | Low (whatever is on screen goes in) | Getting one out as fast as possible |
| Rendering in 3D software | 3D software such as Blender, and learning to use it | 30 minutes to a few hours | High (you set resolution, lighting and background) | Raising the quality for a portfolio or an announcement |
| A service with video export | An account with a service that supports it | 1 to 3 minutes | Medium (within the settings the service decides) | Putting out videos in a consistent format on a regular basis |
There is no single "right" answer; in practice, you choose based on what the post is for. For everyday progress updates, a screen recording is plenty. For a shop page or a portfolio, rendering wins because you control the background and lighting.
Method 1: Screen-record a viewer while you rotate the model
This is the method with the fewest steps. Open the 3D model in a browser or phone viewer, rotate it with your finger or mouse, and capture it with your device's screen recorder.
- Open the 3D model in a viewer (about 1 minute) — For GLB files, there are several viewers that open right in the browser. We cover how to open them in 5 Free Ways to View 3D Models.
- Tidy up the view (about 2 minutes) — Set a plain background and resize the model so it sits in the middle of the screen. Close UI panels as far as you can.
- Start the screen recording (about 10 seconds) — On a phone, use the built-in screen recorder; on a PC, use the standard recording feature or recording software.
- Rotate it once or twice at a steady speed (about 10 seconds) — If you're turning it by hand, it looks cleaner if you don't stop partway or change speed.
- Trim off the unneeded start and end (about 3 minutes) — Cut the parts where you can see yourself starting and stopping the recording.
Watch out: because this method captures "whatever is on screen," notification banners, the cursor, and the viewer's logo or buttons tend to sneak in. Always play the whole video back before posting. Rotating by hand also makes the speed wobble, so if the viewer has an auto-rotate feature, using it gives steadier results.
Method 2: Render a turntable in 3D software
When you want to fine-tune the quality, rotate the camera or the model inside 3D software and render it as an image sequence or a video. All-in-one 3D software like the free Blender is the typical choice.
- Import the 3D model (about 5 minutes) — Many 3D programs support GLB / glTF out of the box or through an add-on. glTF is a standard created by the Khronos Group and described as a royalty-free specification for the efficient transmission and loading of 3D scenes and models; in 2022 it became an international standard as ISO/IEC 12113:2022 (source: Khronos Group, "glTF Overview", as of July 2026).
- Decide on the lighting and background (about 15 minutes) — This is the biggest difference from screen recording. You decide how the shadows fall, the background color, and whether to use backlighting.
- Set up the rotation animation (about 10 minutes) — Either keep the model still and orbit the camera once around it, or rotate the model itself 360 degrees on the Y axis. If one full turn divides evenly into the frame count, the loop seam won't stand out.
- Render and export (a few minutes to a few hours) — The time needed varies a lot depending on resolution, frame count and render method.
- If needed, adjust the length and format in video editing software (about 10 minutes)
Watch out: render times can balloon depending on your settings. For the first pass, do a test render at low resolution with a short frame count, lock in the brightness and composition, and only then move on to the final render. It ends up being the faster route.
Method 3: Use a service with a video export feature
Some services that handle 3D models offer a one-click export of a rotating video. You get less freedom over the settings, but the advantage is consistent quality every time.
In Figmee, the screen that displays a generated 3D model has a "Create 360° video" option, which lets you export a video of the model rotating right there. The specs are as follows:
- The video is 6 seconds long and rotates twice in that time (3 seconds per turn).
- MP4 (H.264) is preferred; in browsers that don't support it, it falls back to WebM.
- A logo watermark is added in the bottom-right corner.
- The conversion happens entirely in the browser, and you can save or share the exported file straight away.
Generating video in the browser relies on MediaRecorder, the web-standard recording API. MediaRecorder is part of the MediaStream Recording API and provides functionality to record media streams (source: MDN Web Docs, "MediaRecorder", as of July 2026). Older browsers that don't support this API can't do the export, so if it isn't working, trying a different browser is usually the quickest fix.
Format details to check before you post
An exported video can't always be posted as is. Each platform has its own requirements for what it accepts, so checking the help pages of the platform you're posting to will save you from rejected uploads. For example, YouTube Shorts can be uploaded at resolutions up to 1080p, with a maximum length of 3 minutes (source: YouTube Help, "Create YouTube Shorts", as of July 2026).
There are four main things to check:
| What to check | What to look for |
|---|---|
| File format | Whether it was exported as MP4. If it's still WebM, some platforms may not accept it |
| Aspect ratio | Square (1:1), vertical (9:16) or horizontal (16:9). How it gets cropped depends on where it's posted |
| Length | Short-form feeds have upper limits. A rotating video works well at 6 to 12 seconds |
| Audio | Whether you can post it silent. Some editing apps don't accept silent videos |
Because a 3D turntable video has the subject in the center with space on all four sides, it pairs especially well with a square frame. When you post it to a vertical feed, putting the title of the piece or a short line in the space above and below keeps it from feeling empty.
5 tips for a clean-looking video
- Keep the background plain (about 2 minutes) — A busy background lets the outline blend into it and weakens the sense of depth. A plain color close to the complement of your piece's colors is easy to work with.
- Make one turn take 3 to 4 seconds (just a setting) — Too fast and viewers can't read the shape; too slow and they won't watch to the end.
- Show the whole thing in the first second (about 5 minutes of framing) — Opening on a close-up tends to lose viewers before they understand what the piece is. Showing the whole first, then moving in, is the safe order.
- Use a whole number of turns (just a setting) — If it ends at an awkward point like 1.5 turns, the seam jumps when the video loops.
- Watch the export all the way through yourself (about 1 minute) — Broken areas on the back, the watermark position and notifications in the frame are things you only notice once you play it back.
3 things to fix on the model before you spin it
Even when you film it the same way, how stable the result looks depends on the state of the model. Checking these three points before you start tweaking capture settings will save you from redoing work.
1. Is the center of rotation off? If the model's origin (its rotation axis) is away from the center of the body, the subject swings widely across the screen as it turns. If the viewer's auto-rotate shows obvious axis wobble, moving the origin to the center in 3D software and exporting again will settle it down.
2. Is the bottom finished? A 3D model generated from a single image often has no information about the surface it stands on, since that isn't visible in the original image, so the bottom may be sliced off flat or bulge out unnaturally. If you rotate it at nearly eye level, the bottom barely shows, but tilt the view to look down slightly and it comes into frame. Decide the camera height after you've checked how the bottom looks.
3. Is the texture rough anywhere? As it rotates, the side and back textures you couldn't see from the front come onto the screen one after another. Spin it once and check for color mismatches at seams or stretched patterns. We explain how textures work in What Is a Texture? How 3D Models Get Their Color and Surface Look.
These three points are things video settings can't fix. Put the other way around, once they're in order, all that's left is choosing the background and rotation speed, and you'll have a video worth watching.
If you want to fix the model before making the video
Once you spin it, you may find things you didn't notice in a still image — messy texture on the back, a thin part that's missing. In that case, fixing the 3D model itself solves the problem faster than fiddling with video settings. GLB files can be imported into many 3D programs, so use How to Edit AI-Generated 3D Models as a reference, make your fixes, and then export again.
Frequently asked questions
Q. Can I make a turntable video with just my phone? A. Yes. The easiest way is to open the 3D model in your phone's browser and capture it with the screen recorder. With a service that has an export feature, you don't even need to record; you get the file right there. However, when your phone heats up, dropped frames become more likely, so avoid long continuous recording sessions.
Q. I can't upload my exported video to social media. A. Start by checking the file format. If a video exported from the browser is in WebM format, some services won't accept it. The reliable fix is to convert it to MP4, or to make it again in an environment that can export MP4 (a different browser or 3D software). Also check that the length and resolution don't exceed the platform's limits.
Q. How many seconds is a good length? A. It depends on your goal, but if you just want to show the rotation, 6 to 12 seconds is enough. At 3 to 4 seconds per turn, that's 2 to 3 turns. Any longer and you're repeating the same image, so if you want a longer video, adding close-up shots or the creation process makes people more likely to watch to the end.
Q. Can I remove the watermark or logo? A. When you use a service's export feature, whether there's a watermark depends on that service's specs. If you want a version without a watermark, switch to downloading the 3D model data and rendering it in your own 3D software. As long as the service lets you export GLB, that route is always open.
Summary
The basic form of a 3D model video is a turntable video, with the model rotating at a steady speed. Choose by purpose: screen-record a viewer for convenience, render in 3D software for quality, or use a service with an export feature when you want the same format every time. For the finishing touches, just keeping three things in mind — a plain background, 3 to 4 seconds per turn, and a whole number of turns — makes the result look stable. And don't forget to play it through once before posting to check the back and anything that slipped into the frame.
A rotating video doesn't have to be posted on its own; it can also be the final image in a process series where you've shown the rough, line art and coloring in order. We cover how to capture and arrange the in-progress images in How to Post Your Art Process.
When you post a year-in-review image of your art at the end of the year, you can also add the rotating video as a second post. We show how to make the summary image in Art Summary Template: Your Year in Art, Plus One in 3D.
Related guides
- 5 Free Ways to View 3D Models — A Beginner's Guide to Opening Them in a Browser or on Your Phone
- How to Edit AI-Generated 3D Models: A Complete Overview of Taking Them into Blender, Game Engines and 3D Printing
- What Is a 3D Model? Meaning, Types, and How to Make One
- What Is a GLB File? How to Open, Use, and Convert It, Explained Simply
- What Is a Texture? A Beginner-Friendly Guide to How 3D Models Get Their Color and Surface Look




